ptm silver lcd wall mount

360 degree rotation TURN/TILT wall mount for screens up to 32" and up to 23kg. Fixings included.

The colour of this bracket is BLACK, a silver version is also listed on the website.

This mount uses innovative 'Radial Glide' (tm) technology to allow you to adjust your display up to 15 degree in any direction.

This bracket allows the TV to rotate by 360 degrees, thus enabling the TV to be mounted in landscape or portrait modes. This feature also allows the correction of any slight mounting errors at the wall, in that the TV can be straightened where the TV is attached to the bracket. Even with this exceptional feature, it still allows the TV to stand less than 8cm off the wall.

Cables can be routed through the wall plate for a neat appearance.

This mount is manufactured from steel.

Wall fixings suitable for brick or other masonry walls are included.

Will this bracket fit my TV?

Your TV must weigh less than 23kg and have a screen diameter less than 32"

On the back-plate of the TV there must be 4 threaded screw-holes, set out in a square, spaced either 75 x 75mm, 100 x 100mm or 200 x 100mm. No other mounting screw-hole spacings can be used with this bracket, unless one of the following options are also used:-

Should your TV have mounting screw-holes spaced at 200 x 200mm, then the optional 200 x 200mm adaptor plate listed below would be needed.

If your TV's mounting screw positions are between 200 and 570mm wide, then the Non VESA Adaptor listed below would be required.

Can I use this mount on my wall type?

This bracket is ideal for brick, concrete, other masonry and wooden walls.

This bracket can be mounted on to plasterboard walls, assuming that it is fixed to the wooden stud-work supporting the plasterboard. We do not recommend that this bracket is attached solely to the plasterboard.

Warranty

Premier Mounts offers a Life Time Warranty on all of it's products, this covers defects in materials and workmanship.