TURN/TILT - Cantilever Mount Suits screens 23~32" and weighing up to 25kg.
The colour of this mount is SILVER and DARK GREY (Anthracite).
Ideal for use in an alcove or for mounting the TV in a cabinet or other restricted space. As this is a true cantilever mount, the TV always stays central to the wall-fixing, there is no lateral (left / right) movement of the bracket.
Flexibility and freedom of movement are the key benefits of the EFW 6245. You can tilt your screen by 15 degrees and turn your screen left or right by up to 60 degrees for the optimal viewing experience. Don’t worry about damaging your screen or wall either, as the EFW 6245 features Vogel’s unique Screen Protection System (SPS) to protect both screen and wall.
The EFW6245 also offers the following Vogel's benefits :
C.I.S - Cable Inlay System - hides unsightly cables.
3 Step Installation Procedure - Ensuring safe and secure installation.
Modular Upgrade - Allows optional AV equipment supports to be connected directly to the bracket.
All screw-fittings are included.
Tools required to complete this products' installation are :-
Spirit Level, 12mm & 13mm Spanner (Wrench), Cross-Point Screwdriver, 10mm masonry drill bit or 4mm wood drill bit. (These are not included)
The wall fitting is 104mm (4.11") x 356mm (14.02")
This mount is manufactured from steel and aluminium.
Will this bracket fit my TV?
Your TV must weigh less than 25kg (55lbs) and have a screen diameter less than 32"
On the back-plate of the TV there must be 4 or 6 threaded screw-holes, set out in a square or rectangle, spaced either 75 x 75mm or 100 x 100mm, 200 x 100mm or 200 x 200mm. No other mounting screw-hole spacings can be used with this bracket as standard.
If your TV has mounting screw-hole positions that are 200 ~ 450mm wide by 200 ~ 312mm high, then the optional non-VESA adaptor listed below, should be used (EFA6875)
Can I use this mount on my wall type?
This bracket is ideal for brick, concrete, other masonry and wooden walls.
This bracket can be mounted on to plasterboard walls, assuming that it is fixed to the wooden stud-work supporting the plasterboard. We do not recommend that this bracket is attached solely to the plasterboard.
If your wall type is plasterboard and the ideal mounting position is between the wooden studs, then the optional stud-wall adaptor below should be used (EFA6895)
Warranty
Vogel's offers a 10 year Warranty on this product, this covers defects in materials and workmanship.
Will This Vogel’s product fit your TV? - CLICK HERE to find out.
- CLICK HERE to E-mail us your query. Please remember to list the model number of the product you are enquiring about. Our advice line can be very busy, especially at weekends, so it may suit you to e-mail your query.
TOTAL: £0.00
